Carry up to two kayaks due to the dual position design that transforms from a J-cradle to two boat stacker position
Integrated StrapCatch for easy strap management when loading kayak
Upright folds flat when not in use
Fully assembled out of the box
Locks to load bars with Thule’s One Key System Lock Cylinders (sold separately)
Universal mounting design fits all types of load bars up to 80.5 mm wide quickly and easily
Load straps with buckle bumpers and bow and stern tie downs included for one boat
Supports one boat up to 75 lb or two boats with combined weight of 130 lbs or less
Brand : Thule
Country of Origin : Imported
Web ID: 24THUUTHLHLLPRTXTPSR
SKU: 25223725
Read More
Specifications
Load capacity
130 lb
Dimensions (LxWxH)
20 x 9 x 20 in
Weight
12.5 lb
Length of straps
2x15'
One Key System compatible
Yes
Fits Thule WingBar Evo
Yes
Fits Thule WingBar
Yes
Fits Thule WingBar Edge
Yes
Fits Thule SquareBar Evo
Yes
REVIEWS
4.4
88%
Recommended
19 Reviews
Peninsula paddler
Verified Purchase
1 month ago
Insufficient Padding For Kevlar Or Fiberglass Boat
There is not adequate padding (very thin coating of rubber, maybe 1/8 inch, on top of hard plastic) on the bottom to safely carry a composite kayak. I will need to add padding if I use it to carry my Kevlar boat, otherwise I would be concerned the slightest bump would crack my kayak. Thule really should specify this in the description. It’s probably ok for a plastic boat.
Read More
kelto
Verified Purchase
1 month ago
Breaks With Simple Wear
After only a couple uses, but having had the cradles on my car for a few months, I went to tighten the straps that attach to the crossbars. Firstly, the straps barely open enough to fit over a wingbar evo, secondly, the one piece where the strap slots in to hold in place had completely torn. Turns out the ends are just plastic and the metal I side doesn't go all the way out. I also have one screw (not the same cradle) stripping badly. Poor quality product.
Read More
Mike L
Verified Purchase
2 months ago
Great Quality Folding J-cradle Design!
Been looking to pick up a j-cradle style kayak roof rack for a while and the Hull-a-Port XTR ticked all the right boxes. It safely holds the masks in place while you get them secured. The added strap retainer makes for an easy time securing the straps prior to loading the kayaks. The cradles mounted seamlessly to my OEM RAV4 roof rails. Transported my kayaks over 300 miles without any concerns or loosening. Folding flat, the cradles generated very little road noise. Definitely recommended by me!
Read More
fredrankin
Verified Purchase
4 months ago
Reliable
I carry two kayaks on my van when we travel for our annual vacation. Since I am a senior citizen, I needed a product that was easy to install and reliable. I found both of those attributes in the Thule Hull-a-Port XTR kayak carrier. It was easy to install and my kayaks fit perfectly on the carriers.
Read More
Kayak Lover
Received incentive
9 months ago
So Easy To Use!!!
I bought this a month ago and I am so please with my Thule - Thule Hull-a-Port XTR Kayak Rack. It is so easy to install and use.
Read More
Chaas
Verified Purchase
1 year ago
Works As Advertised
We slapped this rack on top of our Toyota factory racks. They were easy to fit and securely held our pretty long kayak. I haven't tried with 2 boats yet.
Read More
Jonathan F
Verified Purchase
1 year ago
Bien Pensé
Facile à installer et à utiliser. S’installe en quelques minutes et se retire tout aussi facilement, donc aucune raison de laisser le tout en place quand on en a pas besoin. Bye bye le bruit des supports à kayak.
Read More
Vinni
1 year ago
Awesome Mount.
This mount is super easy to use and dont mess up the look of your car if you care at all. They are sturdy and I havent had anything break on me after using it more than ten times so far.
Read More
Alangram
Verified Purchase
1 year ago
Kayak Holders
Bought 2 of the kayak holders and they were so easy to assemble. Only problem we had and continue to have are the bow and stern cords. It didn’t really come with a racket like all the videos show. It’s been tough knowing how to assemble the cord to the piece they gave us. Still trying to figure it out. If anyone knows of a video that would be great. Excited to use these soon if it ever stops raining here in Maine.
Read More
Steelers fan
Verified Purchase
2 years ago
Works As Advertised
The Hull - a - port is easy to install. Takes a few minutes tops and holds my 10 foot kayak securely to the roof of my crosstrek.
Read More
Miramichi Kayaker
Verified Purchase
2 years ago
Love The New Attachment Feature
Very happy with the new updated rack , the strap system used to attach the kayak rack to the load bars is a big upgrade from older models
Read More
Wepmodee
Verified Purchase
3 years ago
Very Solid Product
Purchased 2 sets of the Hull-a-port for our Wrangler JK. Used the the Jeep brand cross bars and the Thule J hooks fit perfectly. Very easy to put on and take off the cross bars. Our kayaks fit perfectly on the Hulu-a-ports and are very secure. We paid extra for the best and we are not disappointed…would highly recommend and would buy them again.
Read More
mdezrin
Verified Purchase
3 years ago
Great Kayak Carrier
I have 3 of these carriers. They are solid, sturdy add-ons to my roof rack. One of my kayaks is an unwieldy 72 lb tandem. The design of the rack helps us slide it up on top and into the carrier.
Read More
Josh
Verified Purchase
3 years ago
Rock Solid
I Bought these racks for a 10 Hour trip to North Carolina. these things are absolutely rock steady. The steel Straps that attach to your cross bars don't slip a millimeter during transit. also the strap guide on the top bar of these racks are great so you can set the strap and fold it up without having to climb up on the car to do so. Very pricey as far as kayak racks go but worth every penny in piece of mind.
Read More
Jester
3 years ago
Hit And Miss
Like another reviewer, I too have problems with the rack sitting flush on the load bars (evo). This results in the hull of the boat only making partial contact with the hull-a-port base pad. I assume these would work much better on the square bars vs evo. On the plus side, the straps are a nice upgrade from previous generation which uses a nut and bot to fasten to load bars.