MSR WindBurner Hanging Kit

About This Item

Design and Details

  • Hanging kit for the Windburner stove system
  • Sliding tensioner to secure your WindBurner pot while offering unobstructed access
  • Made in USA
  • Brand : MSR
  • Web ID: 23MSRUWNDBRNRHNGNCAC
  • SKU: 25483766
Read More

REVIEWS

3.6

5 Reviews

Works As Intended

I have only used this hanging kit under ideal conditions .It hangs the MSR stove system securely off the ground as intended. It does takes some technique to maneuver the pot in and out; especially when it is hot. The biggest negative was the wires heating up and starting to melt the neoprene insulation on the pot. I think I'll wrap some aluminum tape around it to remediate this problem when I use it again. Otherwise it works well in those situations were the stoves gotta hang.

Read More

Functional But Has Issues

The hanging system works okay. However the wires melt the insulation around the cup and there is no easy way to remove the insulation to prevent this.

Read More

Use Some Sense.

Before attaching this and running your stove, remove the insulator from windburner cup. You can use a separate pot handle to pour from the cup but using this with the insulator on WILL burn it.

Read More

Potentionally Melts Down The Insulated Cozy!

First of all, I love the WindBurner-system and MSR! For the next week we are planning a climbing-trip, so I bought the Hanging Kit, since it is designed to meet the needs of these activities. Today I tested the Hanging Kit for the first time with my 1.8 L pot on my balcony. I assembled the stove and the Hanging Kit according to the instructions. I started the stove, let it warm up until the wire glowed and put the full pot (1 L of water; ""Max Fill"" mark) on the stove and let the water boil. After that I recognized that one wire melted into the insulated cozy (see pictures). On the second try, I again put the full 1.8 L pot (1 L of water) on the WindBurner directly after starting the stove. The damage did not recur, so I thought it was my fault, because I had let the stove warm up at the first try so that the wires had got heated. Third try; this time with my full 1 L pot (aprox. 0,6 L or 20 oz of water; ""Max Fill"" mark). I started the stove, immediately put the pot on the hanging WindBurner. Seconds after the assembly, again one wire started to melt the insulated cozy (see pictures). I aborted my testings instantly. In conclusion of my testings under normal conditions (10 C° or 50 F°; almost windless), I cannot recommend this product because it potentionally melts the insulated cozy.

Read More

Simple Product, But Really Useful!

This hanging system for the Windburner is really nice to have in bigwall climbing and in high-altitude camp. In those place, is hard to find a flat surface to put the system on. With this lightweight system, you can hang your Windburner everywhere. This is an awesome item for every climber and alpinist who own the Windburner Stove System.

Read More

Read All Reviews (5)

Write A Review

PL PRO TIPS